FADO pump group with electric mixing unit 1" NGZ04

27ebe122-5ec7-46b9-93e3-a6af749a18c0
12.07.2024 - News

FADO pump group with electric mixing unit 1" NGZ04

The quick installation group is a ready-made set of valves and is designed to connect a floor heating/boiler/radiator heating circuit with automatic control of the set temperature of the heat carrier of a thermostatic mixing valve installed in the supply line. The automatic temperature setting range is 35-60°C.

The circulation pump is not included in the group and must be ordered separately, depending on the required characteristics of the radiator or boiler circuit.

  • FADO pump group with thermostatic valve 1" NGZ03

    The FADO quick installation groups with thermostatic valve are designed to supply the heated heating medium from the boiler circuit to the consumer circuit. The supply is carried out with the possibility of adding heat transfer fluid from the return line of the consumer circuit, thereby controlling the temperature of the supply fluid.
    The FADO quick installation groups with thermostatic valve are intended for use in circuits that require additional control of the supply temperature, such as underfloor heating, etc.

  • FADO pump group with mixing unit 1" NGZ02

    The FADO quick installation groups with mixing valve are designed to supply the heated heating medium from the boiler circuit to the consumer circuit. The supply is carried out with the possibility of adding heat transfer fluid from the return line of the consumer circuit, thereby controlling the temperature of the supply heat transfer fluid.
    Groups with FADO three-way mixing valve are designed for use in circuits with additional control of the supply temperature, such as radiator, underfloor heating, etc.

  • FADO pump group without mixing unit 1" NGZ01

    The FADO quick-fit groups are designed to supply the heat transfer medium from the heater to the consumer circuit. The supply is carried out without mixing with the return flow.

The FADO direct-flow quick-fit groups are designed for use in circuits that do not require additional supply temperature control, such as water heater circuits, radiator circuits, etc.

Поделиться: